ABB i-bus KNX Product Manual page 190

ABB i-bus® KNX PARAMETERS
—
7.10.1.1.3
DEPENDENT PARAMETER
Enable function Time
This parameter can be used to enable one of the following time functions:
• Staircase lighting
• Delay for switching ON and OFF
• Flashing
Depending on the selected function, Parameter window Staircase lighting is enabled with the group ob-
ject Staircase lighting permanent ON and the Parameter window Delay for switching ON and OFF or the
Parameter window Flashing with the group objectFlashing . The output response is defined in the corre-
sponding parameter window.
Options
No
Staircase lighting
Delay for switching ON and OFF
Flashing
Condition for visibility:
Parameter window Functions \ Parameter Application \ Option Switch Actuator
No time function is used for this output.
The Staircase lighting time function is used for this output. The Parameter window Staircase lighting
and the group object Staircase lighting permanent ON are enabled.
The time function Delay for switching ON and OFF is used for this output. The Parameter window De-
lay for switching ON and OFF is enabled.
The Flashing time function is used for this output. The Parameter window Flashing and the group ob-
ject Flashing are enabled.
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 190