ABB i-bus KNX Product Manual page 208

ABB i-bus® KNX PARAMETERS
—
7.10.5.1.1
DEPENDENT PARAMETER
Delay for switching ON
This parameter can be used to define the switch-on delay for the output after an On telegram is re-
ceived.
NOTICE
If a delay is set for a scene assignment, the delay set here is not effective.
NOTICE
The delay parameterized here influences the result of the function Logic/Threshold .
More information → Function Delay for switching ON and OFF, Page 94
Options
00:00:00 ... 18:12:15 hh:mm:ss
Condition for visibility:
Parameter window Delay for switching ON and OFF \ Parameter Parameter setting \ Option Individual
—
7.10.5.1.2
DEPENDENT PARAMETER
Delay for switching OFF
This parameter can be used to define the switch-off delay for the output after an Off telegram is re-
ceived.
NOTICE
If a delay is set for a scene assignment, the delay set here is not effective.
NOTICE
The delay parameterized here influences the result of the function Logic/Threshold .
More information → Function Delay for switching ON and OFF, Page 94
Options
00:00:00 ... 18:12:15 hh:mm:ss
Condition for visibility:
Parameter window Delay for switching ON and OFF \ Parameter Parameter setting \ Option Individual
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 208