ABB i-bus KNX Product Manual page 159

ABB i-bus® KNX PARAMETERS
—
7.9.5.1.1
DEPENDENT PARAMETER
Output reacts to wind alarm x
This parameter can be used to define whether the Shutter Actuator output pair reacts to the group ob-
jects Wind alarm x (x = 1, 2, or 3).
The values of the assigned group objects are linked by a logic OR.
Options
No
Yes
Condition for visibility:
Parameter window Safety/Weather \ Parameter Parameter setting \ Option Individual
—
7.9.5.1.1.1
DEPENDENT PARAMETER
Position on wind alarm
This parameter can be used to define the blind/shutter position during a wind alarm.
In case of a weather alarm, the blind/shutter cannot be operated via other group objects, manual op-
eration or the i-bus® Tool until the weather alarm is canceled. Travel range limits are not taken into ac-
count with weather alarms.
Options
No reaction/deactivated
Up
Down
Stop
Unchanged (disable)
Scene assignment
Individual position
Condition for visibility:
Parameter window Safety/Weather \ Parameter Parameter setting \ Option Individual \ Parameter Out-
put reacts to wind alarm x \ Option Yes
Note
If the blind/shutter is moving, it will continue until reaching the target position. If the blind/shutter is
at rest, its position will remain unchanged. The Shutter Actuator output pair does not react to the
alarm.
The blind/shutter moves to the upper end position
The blind/shutter moves to the lower end position
If the blind/shutter is moving, it will be stopped. If the blind/shutter is at rest, its position will remain
unchanged.
If the blind/shutter is moving, it will continue until reaching the target position. If the blind/shutter is
at rest, its position will remain unchanged. The blind/shutter is then disabled in this position.
The scene assigned to the Shutter Actuator output pair is performed.
•
The required positions of the blind/shutter and slats (depending on operating mode) can be defined.
•
•
Scene assignment
Position height (0 % = top; 100 % = bottom)
Position slat (0 % = open; 100 % = closed)
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 159