ABB i-bus KNX Product Manual page 157

ABB i-bus® KNX PARAMETERS
7.9.5 Parameter window Safety/Weather
This parameter window is visible only if, in the Parameter window Functions, the following option is
set for the parameter Enable function Safety/Weather alarms: Yes .
The following settings can be made in the Parameter window Safety/Weather:
• Reaction of the Shutter Actuator output pair and the blind/shutter to weather alarms
• Disable and forced operation of the Shutter Actuator output pair
• Blind/shutter position after cancellation of disabling, forced operation and weather alarms
• Order of priority for weather alarms
More information → Safety functions of Shutter Actuator, Page 77.
If several Shutter Actuator output pairs are to be set to the same values, parameterization can be per-
formed in Parameter window Shutter Actuator template.
Fig. 43: Parameter window Safety/Weather
Note
Note
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 157