ABB i-bus KNX Product Manual page 121

ABB i-bus® KNX PARAMETERS
—
7.6.1.6
DEPENDENT PARAMETER
Data type of group object "Threshold input"
This parameter can be used to define the data type that is received via the group object Threshold input
and evaluated.
Depending on the option selected, one of the following group objects is enabled:
• Threshold input (DPT 5.001)
• Threshold input (DPT 5.010)
• Threshold input (DPT 7.001)
• Threshold input (DPT 9.001)
• Threshold input (DPT 9.004)
Options
Percent (DPT5.001)
Meter pulses (DPT5.010)
Meter pulses (DPT7.001)
Temperature (DPT9.001)
Lux (DPT9.004)
Condition for visibility:
Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option Threshold
—
7.6.1.7
DEPENDENT PARAMETER
Upper threshold
This parameter is used to define the upper threshold. Default values and units depend on the option se-
lected in the Data type of group object "Threshold input" parameter.
Options
0 ... 50 ... 100 %
0 ... 200 ... 255
0 ... 40000 ... 65535
0 ... 22 ... 250 °C
0 ... 400 ... 100,000 lux
Condition for visibility:
Parameter window Logic/Threshold 1 \ Parameter Function of the logic gate \ Option Threshold
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 121