Processing Mode; Parameter Setting For 666Mhz Pll Clock; Parameter Setting For Sscg-Speed Of 15Khz - Fujitsu MB86R02 Jade-D Hardware Manual

Graphics controller

Hide thumbs Also See for MB86R02 Jade-D:

Table of Contents

MB86R02 'Jade-D' Hardware Manual V1.64

6.4 Processing Mode

• All register values in the following tables are valid for PLL clock = 666MHz

SSCG_ FREQUENCY_OFFSET = 0 (default),

SSCG_PEAK_FREQUENCY = 0 (default)

SSCG_PERIOD_JITTER = 10 % (default)

Center Spread

Table 6-3 SSCG speed of 15KHz (refer to 666MHz PLL clock)

PERIOD_DELTA

Modulation Peak %