Fujitsu MB86R02 Jade-D Hardware Manual page 662

MB86R02 'Jade-D' Hardware Manual V1.64
only)
Bit 18 - ChanSel12
17 Channel selection for Pad i=12 for RSDS: 00b=clk, 01b=channel(i-1), 10b=reserved, 11b=const0, for TTL: 00b=clk, 01b=channel i*2-
1, 10b=INV (from inversion control function), 11b=const 0
Bit 14 NDelay12
N-pin Padcell 12 delay: 0b=no delay, 1b= half bit clock cycle delay (TTL-mode only)
Bit 13 Delay12
Pad 12 delay: 0b=no delay, 1b= half bit clock cycle delay
Bit 7 InOut12
output enable control, 0b=input enabled, 1b=output enabled
Bit 6 NPolarity12
N-pin of Padcell 12 drive polarity: TTL: 0=normal, 1=inverted; RSDS: no effect
Bit 5 Polarity12
Pad 12 drive polarity: TTL: 0=normal, 1=inverted; RSDS: 1=normal, 0=inverted
Bit 4 Mode12
Pad 12 drive mode: 0b=differential, 1b=TTL
Bit 1 - 0 Boost12
Boost factor for drive current: x0b=2mA, x1b=4mA (only boost[0] has effect)
22-28