Table of Contents
Advertisement
MB86R02 'Jade-D' Hardware Manual V1.64
34 Electrical Characteristics
34.1 Maximum Ratings
Parameter
Supply voltage
Input voltage
Output voltage
Storage temperature T
Junction temperature T
*1: Power supply for internal part or PLL
*2: Power supply for I/O part
*3: Power supply for SSTL_18 I/O part
Table 34-1 Maximum Ratings
Note:
• Exceeding the maximum ratings (voltage, current, temperature, etc.) may cause damage to
semiconductor devices. Never exceed the ratings above.
• Do not connect an IC output or I/O pin directly or connect them to V
thermal destruction of elements might occur (except for those pins designed for output
timing).
• Provide ESD protection, such as grounding when handling the product; otherwise an
externally-generated electric charge could flow into the IC and cause circuit destruction.
• Applying voltages higher than V
voltage higher than the ratings between V
increases supply current, resulting in the thermal destruction of elements. When handling the
product, never exceed the maximum ratings.
1
RSDS to be added, other values from MB86R01 to be confirmed (validation ongoing)
Symbol
VDDI, PVD(=PLL VDD)
SVD(=SSCG VDD),
APIXVD12(= APIXVDD 1.2V)
VDDE, APIXVD33(= APIXVDD
3.3V)
DDRVDE
V
I
V
O
ST
J
or lower than V
DD
1
Rating
-0.5 to 1.8 (*1)
-0.5 to 4.0 (*2)
-0.5 to 2.5 (*3)
-0.5 to VDDI + 0.5 (< 1.8V)
-0.5 to VDDE + 0.5 (< 4.0V)
-0.5 to DDRVDE + 0.5 (<
2.5V)
-0.5 to VDDI + 0.5 (< 1.8V)
-0.5 to VDDE + 0.5 (< 4.0V)
-0.5 to DDRVDE + 0.5 (<
2.5V)
-55 to 125
-40 to 125
to I/O pins of this CMOS IC, or applying
SS
and V
can cause latch-up. The latch up
DD
SS
Unit
V
V
V
V
V
°C
°C
or V
directly as the
DD
SS
34-1
Advertisement
Table of Contents
