Table of Contents
Advertisement
MB86R02 'Jade-D' Hardware Manual V1.64
18.6.2.3
Display parameters
The display area is defined according to the following parameters. Each parameter is set
independently at the respective register.
VSW
Note: The actual parameter settings are little different from the above. The details, please refer
"Interlaced mode".
HTP
HSP
HSW
HDP
HDB
VTR
VSP
VSW
VDP
LnWX
LnWY
LnWW
LnWH
When not splitting the window, set HDP to HDB and display only the left side of the window. The
settings must meet the following relationship:
0 < HDB ≤ HDP < HSP < HSP + HSW + 1 < HTP
0 < VDP < VSP < VSP + VSW + 1 < VTR
18-20
HSP
HDP
HDB
LnWY
LnWX
LnWW
LnWH
Display Parameters
Horizontal Total Pixels
Horizontal Synchronize pulse Position
Horizontal Synchronize pulse Width
Horizontal Display Period
Horizontal Display Boundary
Vertical Total Raster
Vertical Synchronize pulse Position
Vertical Synchronize pulse Width
Vertical Display Period
Layer n Window position X
Layer n Window position Y
Layer n Window Width
Layer n Window Height
HTP
HSW
Advertisement
Table of Contents
