Table of Contents
Advertisement
Chapter 3
Device Management
Enable
admin logging diagnostics netconf-trace-log enabled
Disable
no admin logging diagnostics netconf-trace-log enabled
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 3.9.4.5
Enabling/Disabling the XPATH Trace Log
The XPATH trace log records internal events related to XPATH routines that require interaction with an XPATH
component.
CAUTION!
Configuration hazard – risk of reduced performance. Enabling diagnostic logging will significantly affect
the performance of RUGGEDCOM ROX II. Only enable diagnostic logging when directed by Siemens.
To enable or disable the XPATH Trace log, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Enable or disable the XPATH Trace log by typing the following commands:
Enable
admin logging diagnostics xpath-trace-log enabled
Disable
no admin logging diagnostics xpath-trace-log enabled
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 3.9.4.6
Enabling/Disabling the WebUI Trace Log
The WebUI trace log records all transactions related to the Web interface, such as configuration changes, error
messages, etc.
CAUTION!
Configuration hazard – risk of reduced performance. Enabling diagnostic logging will significantly affect
the performance of RUGGEDCOM ROX II. Only enable diagnostic logging when directed by Siemens.
To enable or disable the WebUI Trace log, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Enable or disable the WebUI Trace log by typing the following commands:
Enable
admin logging diagnostics webui-trace-log enabled
Disable
no admin logging diagnostics webui-trace-log enabled
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
64
RUGGEDCOM ROX II
CLI User Guide
Enabling/Disabling the XPATH Trace Log
Advertisement
Table of Contents
Troubleshooting
