Viewing A List Of Cellular Modem Interfaces; Viewing The Status Of A Cellular Modem Interface - Siemens RUGGEDCOM ROX II User Manual

Chapter 3
Device Management
• Section 3.22.6, "Configuring a Cellular Modem Interface"
• Section 3.22.7, "Activating a Cellular Modem Account"
• Section 3.22.8, "Resetting the Cellular Modem"
• Section 3.22.9, "Running AT Commands"
• Section 3.22.10, "Connecting as a PPP Client"
Section 3.22.1

Viewing a List of Cellular Modem Interfaces

To view a list of cellular modem interfaces, type:
show running-config interface cellmodem
A table or list similar to the following example appears:
ruggedcom# show running-config interface cellmodem
interface
cellmodem lm4 1
enabled
no alias
cdma ppp-client
!
!
Section 3.22.2

Viewing the Status of a Cellular Modem Interface

To view the status of a cellular modem interface, type:
show interfaces cellmodem slot port profile
Where:
• slot is the name of the module location
• port is the port number (or a list of ports, if aggregated in a port trunk) for the module
• profile is the profile configured for the module
A table or list similar to the following example appears:
ruggedcom# show interfaces cellmodem cel-6-1 cdma
NETWORK
IFNAME TYPE SUPPORTED
------------------------------------------------------------------------------------
cel-6-1 cdma
This table or list provides the following information:
Parameter
state
media
126
RSSI
ESN ECIO INDICATOR
0 0
NETWORK NETWORK NETWORK
OPERATOR IN USE STATUS
Unknown
Description
Synopsis: { not set, up, down, testing, unknown, dormant,
notPresent, lowerLayerDown }
The port's link status.
Synopsis: A string 1 to 31 characters long
Viewing a List of Cellular Modem Interfaces
RUGGEDCOM ROX II
CLI User Guide
PHONE
NUMBER