Configuring Certificates And Private Keys; Managing Elan Addresses - Siemens RUGGEDCOM ROX II User Manual

Chapter 5
Setup and Configuration
Parameter
all-ipv6-interfaces
all-interfaces
port { port }
If all-interfaces is selected, configure one or more network addresses for RUGGEDCOM ELAN to
3.
listen to. For more information, refer to
4. Configure certificates and private keys for RUGGEDCOM ELAN. For more information, refer to
Section 5.43.2, "Configuring Certificates and Private
5. Add one or more CA certificate lists. For more information, refer to
List".
6. Enable the RUGGEDCOM ELAN application. For more information, refer to
Disabling RUGGEDCOM
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
7.
Section 5.43.2

Configuring Certificates and Private Keys

To configure a certificate and private key for RUGGEDCOM ELAN, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add a certificate. For more information, refer to
3. Add a private key. For more information, refer to
4. Configure the certificate and private key for RUGGEDCOM ELAN by typing:
apps elan certificate cert certificate cert-private-key key
Where:
• certificate is the name of the certificate loaded on the device
• key is the name of the private key loaded on the device
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 5.43.3

Managing eLAN Addresses

The following sections describe how to configure and manage eLAN addresses:
• Section 5.43.3.1, "Viewing a List of Network Addresses"
• Section 5.43.3.2, "Adding a Network Address"
• Section 5.43.3.3, "Deleting a Network Address"
618
Description
Listening on all IPv6 interfaces only - this will clear any configured addresses.
Listening on all IPv4 and IPv6 interfaces - this will clear any configured addresses.
Synopsis: An integer between 1025 and 65535
Default: 5432
The configuration user (> 1024) database port to use with all addresses.
Section 5.43.3.2, "Adding a Network
ELAN".
Section 4.7.4.3, "Adding a Certificate"
Section 4.7.2.2, "Adding a Private
Address".
Keys".
Section 5.43.4.2, "Adding a CA Certificate
Section 5.43.5, "Enabling/
Configuring Certificates and Private Keys
RUGGEDCOM ROX II
CLI User Guide
Key".