Chapter 5
Setup and Configuration
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 5.42.5.3
Deleting a CA Certificate List
To delete a CA certificate list for the RUGGEDCOM CROSSBOW application, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Delete the CA certificate by typing:
no apps crossbow certificate ca-cert-list name
Where:
• name is the name of the CA (Certified Authority) certificate.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.42.6
Viewing the Status of RUGGEDCOM CROSSBOW
To view the status of RUGGEDCOM CROSSBOW, type:
show apps crossbow status
A table or list similar to the following example appears:
ruggedcom# show apps crossbow status
apps crossbow status
daemon status "crossbowd is running"
Section 5.42.7
Viewing the RUGGEDCOM CROSSBOW Log
To view the RUGGEDCOM CROSSBOW log , do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Display the log by typing:
apps crossbow status log
A table or list similar to the following appears:
ruggedcom# apps crossbow status log
crossbowd-log /var/log/syslog:Jan 31 15:15:21 ruggedcom crossbowd[24762]: ssl2tcp (MutulAuth)
[1208114224], elan_init_ctx():179: Unable to loa
d cert chain file '/etc/certs/cxb_test_generated_cert.pem'.
/var/log/syslog:Jan 31 15:15:21 ruggedcom crossbowd[24762]: ssl2tcp (MutulAuth)[1208114224],
gethostbyname() failed using ip= -
> Resource temporarily unavailable
/var/log/syslog:Jan 31 15:15:21 ruggedcom crossbowd[24762]: ssl2tcp (MutulAuth)[1208114224], Create
socket error: :21005 ->Reso
urce temporarily unavailable
/var/log/syslog:Jan 31 15:15:21 ruggedcom crossbowd[24762]: ssl2tcp (MutulAuth)[1208114224],
main():193: Could not create SERVE
616
RUGGEDCOM ROX II
CLI User Guide
Deleting a CA Certificate List