Table of Contents
Advertisement
RUGGEDCOM ROX II
CLI User Guide
Using RUGGEDCOM ROX II
This chapter describes how to use the RUGGEDCOM ROX II interface. It describes the following tasks:
•
Section 2.1, "Connecting to RUGGEDCOM ROX II"
•
Section 2.2, "Default User Names and Passwords"
•
Section 2.3, "Logging In"
•
Section 2.4, "Logging Out"
•
Section 2.5, "Using Network Utilities"
•
Section 2.6, "Using the Command Line Interface"
•
Section 2.7, "Configuring the CLI Interface"
•
Section 2.8, "Accessing Different Modes"
Section 2.1
Connecting to RUGGEDCOM ROX II
The following describes the various methods for connecting the device:
•
Section 2.1.1, "Connecting Directly"
•
Section 2.1.2, "Connecting Through the Network"
Section 2.1.1
Connecting Directly
RUGGEDCOM ROX II can be accessed through a direct serial or Ethernet connection.
Using the RS-232 Serial Console Port
To establish a serial connection to the device, do the following:
1.
Connect a serial terminal or a computer running terminal emulation software to the RS-232 console port on
the device.
Connecting to RUGGEDCOM ROX II
Chapter 2
Using RUGGEDCOM ROX II
15
Advertisement
Table of Contents
Troubleshooting
