Viewing The Status Of Rstp - Siemens RUGGEDCOM ROX II User Manual

Chapter 5
Setup and Configuration
• For Ethernet trunk interfaces:
no interface trunks id spanning-tree msti mstp-id
Where:
▪ id is the ID given to the interface
▪ mstp-id is the ID for the Multiple Spanning Tree Instance
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.36.8

Viewing the Status of RSTP

To view the status of the RSTP network, type:
show switch spanning-tree rstp-status
A list similar to the following appears:
ruggedcom# show switch spanning-tree rstp-status
rstp-status
status
bridge priority
bridge mac
root priority
root mac
regional root priority
regional root mac
root port slot
root port port
root path cost
regional root path cost
configured hello time
learned hello time
configured forward delay 15
learned forward delay
configured max age
learned max age
total top changes
This list provides the following information:
Parameter
status
bridge-priority
bridge-mac
root-priority
root-mac
538
notDesignatedForAnyLAN
32768
00:0a:dc:f6:c6:ff
32768
00:0a:dc:00:71:57
32768
00:0a:dc:f6:c6:ff
lm1
1
38
0
2
2
15
20
20
5
Description
Synopsis: { none, designatedBridge, notDesignatedForAnyLAN,
rootBridge }
The spanning tree status of the bridge. The status may be root or
designated. This field may show text saying 'not designated for any
LAN' if the bridge is not the designated bridge for any of its ports.
The bridge identifier of this bridge.
Synopsis: A string
The bridge identifier of this bridge.
The ports to which the multicast group traffic is forwarded.
Synopsis: A string
The ports to which the multicast group traffic is forwarded.
RUGGEDCOM ROX II
CLI User Guide
Viewing the Status of RSTP