Deleting Custom Host Client Configurations; Managing Host Groups; Viewing A List Of Host Groups - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Section 5.15.10.3

Deleting Custom Host Client Configurations

To delete a custom configuration for a host client on the DHCP server, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the custom configuration by typing:
no services dhcpserver host host options client custom number value
Where:
• host is the name of the host
• number is the number assigned to the host
• value is the value of the custom option
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.15.11

Managing Host Groups

Host-groups allow identical settings to be created for a group of hosts, making it easier to manage changes to the
settings for all the hosts contained within the group. Host-groups contain hosts.
The following sections describe how to configure and manage host groups on a DHCP server:
• Section 5.15.11.1, "Viewing a List of Host Groups"
• Section 5.15.11.2, "Adding a Host Group"
• Section 5.15.11.3, "Configuring Host Group Options"
• Section 5.15.11.4, "Configuring a Host Group Client"
• Section 5.15.11.5, "Deleting a Host Group"
Section 5.15.11.1

Viewing a List of Host Groups

To view a list of host groups, type:
show running-config services dhcpserver host-groups
If host groups have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config services dhcpserver host-groups
services
dhcpserver
host-groups "Local Group"
options
client
no hostname
no subnetmask
no default-route
no broadcast
no domain
no dns-server
no static-route
Deleting Custom Host Client Configurations
Chapter 5
Setup and Configuration
253