Adding A Ca Certificate And Crl - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Parameter
not-before
not-after
To view the status of a Certificate Revocation List (CRL) that was not signed by a separate certificate, type:
show security crypto ca certificate crl-status
Where:
• certificate is the name of the certificate
This table or list provides the following information:
Parameter
issuer
this-update
next-update
Section 4.7.1.3

Adding a CA Certificate and CRL

To add a certificate issued by a Certified Authority (CA) and its associated Certificate Revocation List (CRL), do
the following:
NOTE
Only admin users can read/write certificates and keys on the device.
1. Enable auto-wizard by typing:
autowizard true
2. Make sure the CLI is in Configuration mode.
NOTE
Before inserting the contents of the certificate, enter multi-line mode by pressing Esc+m. Press
Ctrl+d to exit multi-line mode after the certificate has been added.
3. Add the CA certificate by typing:
security crypto ca certificate key-cert-sign-certificate contents
Where:
• certificate is the name of the certificate
• contents is the contents of the certificate
4. Add the associated Certificate Revocation List (CRL).
Adding a CA Certificate and CRL
Description
Synopsis: A string
This certificate is not valid before this date.
Synopsis: A string
This certificate is not valid after this date.
Description
Synopsis: A string
Synopsis: A string
This CRL was updated at this date and time.
Synopsis: A string
This certificate must be updated by this date and time.
Chapter 4
System Administration
167