Discovering Snmp Engine Ids; Managing Snmp Communities; Viewing A List Of Snmp Communities - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Parameter
wrong-digests
decryption-errors
Section 5.11.4

Discovering SNMP Engine IDs

To discover an SNMP engine ID on a device, type:
admin snmp snmp-discover
Section 5.11.5

Managing SNMP Communities

The following sections describe how to configure and manage SNMP communities:
• Section 5.11.5.1, "Viewing a List of SNMP Communities"
• Section 5.11.5.2, "Adding an SNMP Community"
• Section 5.11.5.3, "Deleting an SNMP Community"
Section 5.11.5.1

Viewing a List of SNMP Communities

To view a list of SNMP communities configured on the device, type:
show running-config admin snmp snmp-community name
If communities have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config admin snmp snmp-community | tab
COMMUNITY USER
NAME NAME
------------------
private oper
public guest
!
!
By default, private and public communities are pre-configured. If additional communities are required, add them
as needed. For more information, refer to
Discovering SNMP Engine IDs
Description
The total number of packets received by the SNMP engine which
were dropped because they did not contain the expected digest
value.
The total number of packets received by the SNMP engine which
were dropped because they could not be decrypted.
Section 5.11.5.2, "Adding an SNMP
Setup and Configuration
Community".
Chapter 5
207