Viewing A List Of Key Chains; Viewing A List Of Keys - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
• Section 5.20.9.3, "Adding a Key Chain"
• Section 5.20.9.4, "Adding a Key"
• Section 5.20.9.5, "Deleting a Key Chain"
• Section 5.20.9.6, "Deleting a Key"
Section 5.20.9.1

Viewing a List of Key Chains

To view a list of key chains for dynamic RIP routes, type:
show running-config routing rip key-chain
If key chains have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config routing rip key-chain
routing rip
key-chain key-1
key 1
key-string RUGGEDCOM
accept-lifetime start 2013-01-01T01:01:01-00:00
accept-lifetime expire 2022-01-01T01:01:01-00:00
send-lifetime start 2013-01-01T01:01:01-00:00
send-lifetime expire 2022-01-01T01:01:01-00:00
!
!
!
If no key chains have been configured, add key chains as needed. For more information, refer to
Section 5.20.9.3, "Adding a Key
Section 5.20.9.2

Viewing a List of Keys

To view a list of keys in a key chain, type:
show running-config routing rip rip key-chain name key
Where:
• name is the name of the key chain
If keys have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config routing rip key-chain key
routing rip
key-chain key-1
key 1
key-string RUGGEDCOM
accept-lifetime start 2013-01-01T01:01:01-00:00
accept-lifetime expire 2022-01-01T01:01:01-00:00
send-lifetime start 2013-01-01T01:01:01-00:00
send-lifetime expire 2022-01-01T01:01:01-00:00
!
!
!
If no keys have been configured, add keys as needed. For more information, refer to
Key".
Viewing a List of Key Chains
Chain".
Chapter 5
Setup and Configuration
Section 5.20.9.4, "Adding a
351