Table of Contents
Advertisement
Chapter 5
Setup and Configuration
Section 5.43.4
Managing CA Certificate Lists
The following sections describe how to manage CA certificate lists for the RUGGEDCOM ELAN application:
•
Section 5.43.4.1, "Viewing a List of RUGGEDCOM ELAN CA Certificate Lists"
•
Section 5.43.4.2, "Adding a CA Certificate List"
•
Section 5.43.4.3, "Deleting a CA Certificate List"
Section 5.43.4.1
Viewing a List of RUGGEDCOM ELAN CA Certificate Lists
To view a list of CA certificate lists configured for the RUGGEDCOM ELAN application, type:
show running-config apps eLAN certificate ca-cert-list
If CA certificate lists have been configured, a table or list similar to the following example appears:
apps elan
certificate ca-cert-list eLAN_CA
!
!
If no CA certificate lists have been configured, add lists as needed. For more information, refer to
Section 5.43.4.2, "Adding a CA Certificate
Section 5.43.4.2
Adding a CA Certificate List
To add a CA certificate list for the RUGGEDCOM ELAN application, do the following:
1.
Make sure the required CA (Certified Authority) certificate has been added to the device. For more
information, refer to
2.
Make sure the CLI is in Configuration mode.
3.
Add the certificate list by typing:
apps eLAN certificate ca-cert-list name
Where:
• name is the name of the CA (Certified Authority) certificate.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 5.43.4.3
Deleting a CA Certificate List
To delete a CA certificate list for the RUGGEDCOM ELAN application, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Delete the CA certificate by typing:
620
List".
Section 4.7.1.3, "Adding a CA Certificate and CRL"
RUGGEDCOM ROX II
CLI User Guide
Managing CA Certificate Lists
Advertisement
Table of Contents
Troubleshooting
