Siemens RUGGEDCOM ROX II User Manual page 463

RUGGEDCOM ROX II
CLI User Guide
1
1
Figure 7: Example – Establishing Membership with GMRP
1. Multicast Source 2. Switch
The hosts and switches establish membership with the Multicast Group 1 and 2 as follows:
1. Host H1 is GMRP unaware, but needs to see traffic for Multicast Group 1. Therefore, Port E2 on Switch E is
statically configured to forward traffic for Multicast Group 1.
2. Switch E advertises membership in Multicast Group 1 to the network through Port E1, making Port B4 on
Switch B a member of Multicast Group 1.
3. Switch B propagates the join message, causing Ports A1, C1 and D1 to become members of Multicast Group
1.
4. Host H2 is GMRP-aware and sends a join request for Multicast Group 2 to Port C2, which thereby becomes a
member of Multicast Group 2.
5. Switch C propagates the join message, causing Ports A1, B2, D1 and E1 to become members of Multicast
Group 2.
Once GMRP-based registration has propagated through the network, multicast traffic from S1 and S2 can reach
its destination as follows:
GMRP (GARP Multicast Registration Protocol)
A1
A
A2
S2
3. Multicast Host
S1
D2
D
D1
B3
B
B1
B2
B4
E1
E
E2
H1
Chapter 5
Setup and Configuration
C1
C
2
C2
3
H2
425