Managing Domain Name Servers; Viewing A List Of Domain Name Servers; Adding A Domain Name Server - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
1. Make sure the CLI is in Configuration mode.
2. Delete the domain name by typing:
no admin dns search name
Where:
• name is the name of the domain
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 3.25.2

Managing Domain Name Servers

A hierarchical list of domain name servers can be configured for the DNS service. RUGGEDCOM ROX II will
contact each server in the order they are listed when domain names require resolution.
The following sections describe how to configure and manage a list of domain name servers:
• Section 3.25.2.1, "Viewing a List of Domain Name Servers"
• Section 3.25.2.2, "Adding a Domain Name Server"
• Section 3.25.2.3, "Deleting a Domain Name Server"
Section 3.25.2.1

Viewing a List of Domain Name Servers

To view a list of domain name servers, type:
show running-config dns server
If domain name servers have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config admin dns server
admin
dns
server 10.1.1.1
!
!
!
If no domain name servers have been configured, add servers as needed. For more information, refer to
Section 3.25.2.2, "Adding a Domain Name
Section 3.25.2.2

Adding a Domain Name Server

To add a domain name server, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the domain name server by typing:
admin dns server address
Where:
Managing Domain Name Servers
Server".
Chapter 3
Device Management
157