Adding An Ipv4 Address Family; Deleting An Ipv4 Address Family; Managing Redistribution For Ipv4 Address Families - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Section 5.22.10.2

Adding an IPv4 Address Family

To add an IPv4 address family, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the IPv4 address family by typing:
routing bgp address-family ipv4 vrf vrf
Where:
• vrf is the name of the associated VRF definition
3. Add one or more neighbors. For more information, refer to
4. Add one or more redistributions. For more information, refer to
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 5.22.10.3

Deleting an IPv4 Address Family

To delete an IPv4 address family, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the IPv4 address family by typing:
no routing bgp address-family ipv4 vrf vrf
Where:
• vrf is the name of the associated VRF definition
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.22.11

Managing Redistribution for IPv4 Address Families

Redistribution in general is the advertisement of routes by one protocol that have been learned via another
dynamic routing protocol, a static route, or a directly connected router. It is deployed to promote interoperability
between networks running different routing protocols. In the case of VRF, the OSPF dynamic routing protocol is
supported.
For each VRF instance, one or more redistributions can be defined. A redistribution defines the source of the
routing information, a metric and (optional) a pre-defined routing map.
The metric is used for route decision making within the Autonomous System (AS). Care must be taken to define a
metric that is understood by the OSPF routing protocol.
The following sections describe how to configure and manage redistribution for IPv4 address families:
• Section 5.22.11.1, "Viewing a List of Redistributions"
• Section 5.22.11.2, "Adding a Redistribution"
• Section 5.22.11.3, "Deleting a Redistribution"
Adding an IPv4 Address Family
Section 5.22.12.2, "Adding a
Section 5.22.11.2, "Adding a
Chapter 5
Setup and Configuration
Neighbor".
Redistribution".
393