Deleting A Certificate - Siemens RUGGEDCOM ROX II User Manual

Chapter 4
System Administration
1. Make sure the required CA certificates, public keys and/or private keys have been added to the device.
• For more information about adding CA Certificates, refer to
CRL"
• For more information about adding public keys, refer to
• For more information about adding private keys, refer to
2. Enable auto-wizard by typing:
autowizard true
3. Make sure the CLI is in Configuration mode.
4. Add the certificate by typing:
autowizard true security crypto certificate certificate
Where:
• certificate is the name of the certificate.
5. Configure the following parameter(s) as required:
NOTE
Before inserting the contents of the certificate, enter multi-line mode by pressing Esc+m. Press
Ctrl+d to exit multi-line mode after the certificate has been added.
Parameter
contents { contents }
private-key-name { private-key-name }
ca-name { ca-name }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
6.
Section 4.7.4.4

Deleting a Certificate

To delete a certificate, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the certificate by typing:
no security crypto certificate certificate
Where:
• certificate is the name of the certificate.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
174
Section 4.7.1.3, "Adding a CA Certificate and
Section 4.7.3.2, "Adding a Public Key"
Section 4.7.2.2, "Adding a Private Key"
Description
Synopsis: A string 1 to 8192 characters long
The contents of the certificate.
The private key associated with this certificate.
The optional CA certificate for this certificate.
RUGGEDCOM ROX II
CLI User Guide
Deleting a Certificate