Managing Users - Siemens RUGGEDCOM ROX II User Manual

Chapter 4
System Administration
switch port-security radius
Configure the primary or secondary RADIUS server by typing either primary or secondary and
3.
configuring the following parameter(s) as required:
Parameter
address { address }
port-udp { port-udp }
password { password }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 4.9

Managing Users

RUGGEDCOM ROX II allows for up to three user profiles to be configured locally on the device. Each profile
corresponds to one of the following access levels:
• Guest
• Operator
• Admin
The access levels provide or restrict the user's ability to change settings and execute various commands.
Rights
View Settings
Clear Logs
Reset Alarms
Clear Statistics
Change Basic Settings
Change Advanced Settings
Run Commands
CAUTION!
Security hazard – risk of unauthorized access and/or exploitation. To prevent unauthorized access to
the device, make sure to change the default passwords for all users before commissioning the device.
For more information, refer to
The following sections describe how to configure and manage users:
• Section 4.9.1, "Viewing a List of Users"
178
Description
Synopsis: A string 7 to 15 characters long
The IPv4 address of the server.
Synopsis: An integer between 1 and 65535
Default: 1812
The IPv4 port of the server.
Synopsis: A string
The password of the server
Guest
ü
ü
û
û
û
û
û
Section 4.10.2, "Setting a User
User Type
Operator
ü
ü
ü
ü
ü
û
û
Password/Passphrase".
RUGGEDCOM ROX II
CLI User Guide
Admin
ü
ü
ü
ü
ü
ü
ü
Managing Users