Chapter 3
Device Management
5.
Log in to RUGGEDCOM ROX II. For more information, refer to
6.
Flash the RUGGEDCOM ROX II firmware obtained in
For more information, refer to
7.
Repeat
Step 5
partition and reboot the device.
8.
Shut down the device. For more information, refer to
Section 3.8
Managing Files
The following sections describe how to manage important files on the device:
NOTE
Only feature keys and configuration files can be installed or backed up.
•
Section 3.8.1, "Installing Files"
•
Section 3.8.2, "Backing Up Files"
Section 3.8.1
Installing Files
To install a file on the device, such as a configuration file or feature key, do the following:
1.
If the source of the file is a USB Mass Storage drive, insert the drive in the USB port on the device. For more
information, refer to the RUGGEDCOM RX1500/RX1501/RX1510/RX1511/RX1512 Installation Guide.
2.
Navigate to admin » install-files and configure the following parameter(s) as required:
Parameter
file-type { file-type }
url { url }
Section 3.8.2
Backing Up Files
To backup files stored on the device, do the following:
58
Section 3.11.5.2, "Downgrading Using
and
Step 6
to flash the RUGGEDCOM ROX II firmware obtained in
Section 2.3, "Logging
Step 1
to the inactive partition and reboot the device.
ROXflash".
Section 3.4, "Shutting Down the
Description
Synopsis: { config, featurekey, vmfile }
The file types to be copied.
Synopsis: A string 1 to 1024 characters long
The URL of the ROX II file to copy. Supported URIs are HTTP,
SCP, SFTP, FTPS and FTP. To install from a USB flash drive
or microSD/microSDHC drive (if applicable), the URL format is
"usb://<usb-device-name>/path-to-file-on-system" or "sd://sd-1//
path-to-file-on-system". Run "show chassis" to determine the
name of the USB device. Note that only one single partition is
supported for either data medium. For all other protocols, the
format is "protocol://user:password@host:port/path-to-file". If
"port" is not specified, the default port for the protocol is used.
RUGGEDCOM ROX II
CLI User Guide
In".
Step 1
to the other
Device".
Managing Files