Siemens RUGGEDCOM ROX II User Manual page 73

RUGGEDCOM ROX II
CLI User Guide
Parameter
file scp-featurekey-to-url current-filename
user@host:/path/new-filename
file scp-log-to-url current-filename
user@host:/path/new-filename
scp-log-to-url
File Commands
Description
• host is the host name or IP address of the remote computer.
• path path is the path to the feature key file on the remote
computer.
• current-filename is the current filename of the feature key
file.
• new-filename is the new filename for the feature key file. To
use the current filename, specify the current filename or exclude
this parameter from the command.
When prompted, type the password to connect to the remote
computer. For example:
ruggedcom# file scp-featurekey-
from-url jsmith@10.200.20.39:/c:/
ruggedcom/1_cmRX1K-12-11-0015.key
1_cmRX1K-12-11-0015.key
jsmith@10.200.20.39's password:
1_cmRX1K-12-11-0015.key
100% 192 0.2KB/s
Securely copies a feature key file to a remote computer from the
device. The remote computer must have an SCP or SSH (secure
shell) service or client installed and running.
To use this command, the user credentials for the remote computer,
the IP address or host name of the remote computer, the directory
path to the feature key file on the remote computer, and the feature
key file filename must all be known.
Type the command in the following format:
file scp-featurekey-to-url current-filename
user@host:/path/new-filename
Where:
• current-filename is the current filename of the feature key
file.
• user is a user name with access rights to the remote computer.
• host is the host name or IP address of the remote computer.
• path path specifies where to save the feature key file on the
remote computer.
• new-filename is the new filename for the feature key file. To
use the current filename, specify the current filename or exclude
this parameter from the command.
When prompted, type the password to connect to the remote
computer. For example:
ruggedcom# file scp-featurekey-to-url
1_cmRX1K-12-11-0015.key jsmith@10.200.20.39:/c:/
ruggedcom/1_cmRX1K-12-11-0015.key
jsmith@10.200.20.39's password:
1_cmRX1K-12-11-0015.key
100% 192 0.2KB/s
Securely copies a log file to a remote computer from the device. The
remote computer must have an SCP or SSH (secure shell) service
or client installed and running.
To use this command, the user credentials for the remote computer,
the IP address or host name of the remote computer, the directory
path to the log file on the remote computer, and the log file filename
must all be known.
Where:
• current-filename is the current filename of the log file.
Chapter 2
Using RUGGEDCOM ROX II
00:00
00:00
35