Table of Contents
Advertisement
Chapter 5
Setup and Configuration
Parameter
state
pointopoint
bytes
packets
errors
dropped
bytes
packets
errors
dropped
collisions
Section 5.22.3
Configuring VRF
To configure Virtual Routing and Forwarding (VRF), do the following:
IMPORTANT!
BGP routing must be enabled before VRF is configured.
Full VRF Configuration
1.
Make sure BGP is enabled and configure the Autonomous System ID for the Border Gateway Protocol
(BGP). For more information, refer to
2.
Configure a VRF definition and route targets for each Customer Edge (CE) router. For more information,
refer to
Section 5.22.5.2, "Adding a VRF
3.
Configure a routable interface and IP address for each VRF definition. For more information, refer to
Section 5.22.4, "Configuring a VRF
4.
Enable OSPF. For more information, refer to
5.
Configure one or more VRF instances for OSPF. For more information, refer to
OSPF".
6.
Add one or more BGP neighbors. For more information, refer to
7.
Configure one or more IP/VPN tunnel for each interface. For more information, refer to
"Adding an IP/VPN
8.
Add one or more BGP neighbors to the VPNv4 address family. For more information, refer to
Section 5.22.9.2, "Adding a
382
Description
The port's administrative status.
Synopsis: { not set, up, down, testing, unknown, dormant, notPresent, lowerLayerDown }
Shows whether the link is up or down.
Synopsis: true or false
The point-to-point link.
The number of bytes received.
The number of packets received.
The number of error packets received.
The number of packets dropped by the receiving device.
The number of bytes transmitted.
The number of packets transmitted.
The number of error packets transmitted.
The number of packets dropped by the transmitting device.
The number of collisions detected on the port.
Section 5.19.1, "Configuring
Definition".
Interface".
Tunnel".
Neighbor".
BGP".
Section 5.21.2, "Configuring
Section 5.19.7.2, "Adding a
RUGGEDCOM ROX II
CLI User Guide
OSPF".
Section 5.21.2, "Configuring
Neighbor".
Section 5.22.8.2,
Configuring VRF
Advertisement
Table of Contents
Troubleshooting
