Enabling And Configuring Cli Sessions - Siemens RUGGEDCOM ROX II User Manual

Chapter 5
Setup and Configuration
Parameter
send-icmp-redirect
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.3

Enabling and Configuring CLI Sessions

To enable and configure CLI sessions, do the following:
1. Make sure the CLI is in Configuration mode.
2. Navigate to admin » cli and configure the following parameter(s) as required:
Parameter
enabled
listen-ip { listen-ip }
port { port }
extra-ip-ports { extra-ip-ports }
max-sessions { max-sessions }
idle-timeout { idle-timeout }
greeting { greeting }
194
Description
Sends out syncookies when the syn backlog queue of a socket
overflows. This is to prevent against the common 'SYN flood
attack'.
Synopsis: true or false
Default: true
Sends the ICMP redirect.
Description
Synopsis: true or false
Default: true
Provides the ability to configure the device via CLI over ssh and
serial console.
Synopsis: A string
Default: 0.0.0.0
The IP Address the CLI will listen on for CLI requests.
Synopsis: An integer between 0 and 65535
Default: 22
The port on which the CLI listens for CLI requests.
Synopsis: A string
The CLI will also listen on these IP Addresses. For port
values, add ':#' to set the non-default port value. (ie.
xxx.xxx.xxx.xxx:19343 [::] [::]:16000). If using the default address,
do not specify another listen address with the same port.
Synopsis: { unbounded }
Default: 10
The maximum number of concurrent CLI sessions.
Synopsis: A string
Default: PT30M
The maximum time before an idle CLI session is terminated.
The default time is 30 minutes, or PT30M. A timeout period of 1
year, 1 month, 2 hours and 30 seconds would be translated as
P1Y1MT2H30S. The countdown will not begin if the system is
waiting for notifications or if commits are pending. Changes will
not take effect until the next CLI session.
Synopsis: A string 1 to 8192 characters long
Sets the greeting presented when the user logs in to the CLI.
<phrase userlevel="CLI">The string must be enclosed in
quotation marks.</phrase>
Enabling and Configuring CLI Sessions
RUGGEDCOM ROX II
CLI User Guide