6.3.7
Commissioning a third-party motor with encoder via SMC
Operating sequence
In our example a power section is to be configured with third-party motor and encoder. You are
in the "Commissioning" → "Drive system" → "Drives" menu:
1. The system detects that the drive object has not been commissioned and that an initial
commissioning is required:
2. Press the "Change" vertical softkey.
The power section (motor module) will be identified:
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
Commissioning NC-controlled drives
6.3 Guided commissioning of SINAMICS drives
135