Configuring interfaces on the PG/PC
Procedure:
1. Mark the symbol "PG/PC" under NetPro.
2. Select "Object properties" <right-click>.
3. In the displayed "Properties - PG/PC" dialog, select the "Interfaces" tab to configure the
required interfaces.
Example: Configuring Industrial Ethernet
Procedure:
1. Click "New..." to first configure the Ethernet interface.
2. In the selection field, select "Industrial Ethernet".
3. Click "OK".
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
5.8 Configuring a network (NetPro) for PG/PC
PLC commissioning
97