Commissioning NC-controlled drives
6.6 Diagnostics → Trace
6.6.7
Example: Trace session with drive variables
Record the drive trace
Procedure:
1. Open a new session for drive variables.
2. From the list, insert parameter r722 "CU digital inputs status":
3. Select the "Settings" softkey to enter the trigger condition:
4. Select "If variable", and from the "Quick List", insert variable r722.
5. Under condition, select "At bit mask" and enter the required value as decimal number:
6. Confirm with "OK" to accept the settings.
174
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA