Circularity Test: Examples - Siemens SINUMERIK 840D sl Commissioning Manual

Displaying a graphic
To display the measurement result as a graphic, press the "Graphic" softkey.
Figure 10-9
⇒ additional actions:
● Press softkey "Full screen" to display the graphic on a full screen.
If the active "Full screen" softkey is activated a second time, you will return to the previous
display with graphic and display information.
● Press the "Tuning" softkey to carry out additional tuning adaptations. On a new softkey bar,
you can navigate directly to the following areas:
– "Service axis" in the operating area "Diagnostics"
– "Axis machine data"
– "Drive machine data"
– "User views"
● To start the measurement, press the "Start" softkey.
● To stop the measurement, press the "Stop" softkey.
● Press the "Load" softkey to display parameters or the graphic of a measurement.
● Press the "Save" softkey to save parameters or the graphic of a measurement.
The graphic can be saved as a pixel graphic in the PNG or BMP format. The measurement
data are saved in the xml format as *.sud. The following path is set as default path: user/
sinumerik/hmi/log/optimization/circular
● With softkey "<< Back", you return to dialog "Circularity test - measurement".
10.7.3

Circularity test: Examples

The MD32400 $MC_AX_JERK_ENABLE axial jerk limitation is set via a time constant and is
always active.
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
Circularity test - display
Drive tuning
10.7 Circularity test
337