Siemens SINUMERIK 840D sl Commissioning Manual page 58

PLC commissioning
5.2 Creating a SIMATIC S7 project (PROFIBUS)
For the initial commissioning with a PG/PC, it is necessary to configure an Ethernet interface.
In our example, this involves the interface to socket X120.
1. Double-click "CP 840D sl" in the basic rack of the NCU. The "Properties - CP 840D sl" dialog
opens.
2. After clicking the "Properties" button, a new Ethernet interface can be created.
3. For socket X120, enter the IP address "192.168.214.1" and the Subnet screen form
"255.255.255.0".
4. Create the Ethernet interface using "New" and then "OK".
5. Click "OK" twice.
58
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA