Siemens SINUMERIK 840D sl Commissioning Manual page 234

NC commissioning
8.2 Procedure when commissioning the NC
References:
● "Basic Functions" (https://support.industry.siemens.com/cs/ww/en/view/109767455)
Function Manual
– Axes, coordinate systems, frames
– Various NC/PLC interface signals and functions
● "Monitoring and Compensating"
109767451)
– Axis monitoring functions
– Compensations
● "Axes and Spindles" (https://support.industry.siemens.com/cs/ww/en/view/109767454)
Function Manual
– Velocities, setpoint/actual value systems, closed-loop control
– Positioning axes
– Homing
– Spindles
– Synchronous spindle
Setting the technology
User views are lists of machine data and setting data that are compiled for a special application.
In order to set all the technology-relevant data for a turning machine or milling machine on the
control, the following user views are available to facilitate the commissioning:
● Setup_Milling
● Setup_Turning
The files are stored on the CompactFlash card under:
/user/sinumerik/hmi/template/user_views/param
234
Product announcement
80582059)
(https://support.industry.siemens.com/cs/ww/en/view/
(https://support.industry.siemens.com/cs/de/en/view/
Commissioning Manual, 12/2019, A5E48312804B AA
CNC Commissioning: NC, PLC, Drive