Commissioning NC-controlled drives
6.8 Modular machine
6.8.3
Modify configuration
Drive unit - Configuration "Change >"
Procedure:
1. Press the "Change > " softkey to change the configuration.
"Cancel" can be used backup the drive data if it does not yet exist.
2. If a data backup is available, confirm with "OK".
3. Navigate with the arrow keys to the drive object / component that is to be changed.
4. Press the "INSERT" key to enter the new designation.
186
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA