5. Click "OK" twice. You can now assign the slots of the machine control panel with e.g.
"Standard + handwheel".
6. In the hardware catalog, select "SINUMERIK MCP" → "Standard+Handwheel" and drag it to
slot 1.
In the next step, configure the Web browser. Then save, compile and load the configuration to
the PLC.
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
5.2 Creating a SIMATIC S7 project (PROFIBUS)
PLC commissioning
63