Drives: Assign Axis - Siemens SINUMERIK 840D sl Commissioning Manual

Communication between the NC and the drive

7.5 Drives: Assign axis

7.5 Drives: Assign axis
Condition
The commissioning of the drives has been completed.
Assigning drive and axis
Procedure:
1. Press the "Drive system" → "Drives" softkeys in the "Commissioning" operating area.
2. With the "Drive +/-" or "Select drive" softkeys, select the drive; in this example,
SERVO_3.3:3 for the spindle.
3. To assign the drive to an axis, press the "Axis assignment >" softkey on the vertical softkey
bar.
4. Mark the uppermost selection box for the "Setpoint: Axis → drive".
222
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA