Siemens SINUMERIK 840D Series Diagnostics Manual page 334

1 Alarms
Reactions:
Remedy:
Program Continuation:
26014
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
26015
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
26016
Parameters:
Definitions:
Reactions:
Remedy:
Program Continuation:
1-334
- Mode group not ready.
- Channel not ready.
- Channel not ready.
- NC Start disable in this channel.
- Alarm display.
Switch on feedforward control and set it correctly.
Clear alarm with the RESET key in all channels of this mode group. Restart part program.
Axis %1 machine data %2 invalid value
%1 = Axis name, spindle number
%2 = String: MD identifier
Machine data includes a value that is not valid.
- NC not ready.
- Mode group not ready, also effective for single axes
- NC Start disable in this channel.
- NC Stop on alarm.
- The NC switches to follow-up mode.
- Alarm display.
- Interface signals are set.
Repeat entry with correct value and then Power On.
Switch control OFF - ON.
Axis %1 machine data %2[%3] invalid value
%1 = Axis name, spindle number
%2 = String: MD identifier
%3 = Index: MD array index
Machine data includes a value that is not valid.
- NC not ready.
- Mode group not ready, also effective for single axes
- NC Start disable in this channel.
- NC Stop on alarm.
- The NC switches to follow-up mode.
- Alarm display.
- Interface signals are set.
Repeat entry with correct value and then Power On.
Switch control OFF - ON.
Axis %1 machine data %2 invalid value
%1 = Axis name, spindle number
%2 = String: MD identifier
Machine data includes a value that is not valid.
- NC not ready.
- Mode group not ready, also effective for single axes
- NC Start disable in this channel.
- NC Stop on alarm.
- The NC switches to follow-up mode.
- Alarm display.
- Interface signals are set.
Repeat entry with correct value and then Reset.
Clear alarm with the RESET key in all channels of this mode group. Restart part program.
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA) – 11.02 Edition
 Siemens AG, 2002. All rights reserved
11.02