Siemens SINUMERIK 840D Series Diagnostics Manual page 581

11.02
No. 44
Explanation
Not allowed if
Remedy
No. 45
Explanation
Not allowed if
Remedy
No. 46
Explanation
Not allowed if
Remedy
No. 47
Explanation
Not allowed if
Remedy
No. 48
Explanation
Not allowed if
Remedy
No. 49
Explanation
Not allowed if
Remedy
No. 50
Explanation
Not allowed if
Remedy
No. 51
Explanation
Not allowed if
Remedy
No. 52
Explanation
Not allowed if
Remedy
No. 53
Explanation
Not allowed if
Remedy
 Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA) – 11.02 Edition
Activate program. (PI command)
-
-
Activate the program which is still external. (PI command)
-
-
Program selection from another channel. (Channel communication, NC block: INIT)
-
-
Save definition of an asynchronous subroutine which can be activated. (PI command)
-
-
Sets all machine data with the attribute (NEW_CONF) active. (PI command)
-
-
Clear all alarms with the clear condition CANCELCLEAR (PI command, acknowledge
alarm key)
-
-
Continue block search. (NC block, Stopre)
-
-
Start block search. (PI command)
-
-
Continue block search. (PI command)
-
-
Activate digitizing. (PI command)
-
-
1 Alarms
1-581