Fujitsu Eternus DX100 S3 User Manual page 103

Chapter 3 Configuration Settings and Display
3.1 RAID Group Management > set eco-raid-group
-action
■ Example(s)
The following example associates the Eco-mode schedule named "SC001" with the RAID group named
"RGP001":
CLI> set eco-raid-group -rg-name RGP001 -schedule-name SC001 -action enable
The following example associates the Eco-mode schedule named "SC001" with the RAID groups #1- #10 at
the same time:
CLI> set eco-raid-group -rg-number 1-10 -schedule-name SC001 -action enable
The following example disables the Eco-mode function of the RAID group named "RGP001":
CLI> set eco-raid-group -rg-name RGP001 -action disable
The following example associates Eco-mode schedule #1 with the RAID group named "RGP001". The second
command associates the Eco-mode schedule #2 with the same RAID group. These executions result in Eco-
mode schedule #1 being released:
CLI> set eco-raid-group -rg-name RGP001 -schedule-number 1 -action enable
CLI> set eco-raid-group -rg-name RGP001 -schedule-number 2 -action enable
schedule_number
Schedule number
schedule_name
Schedule name
This parameter specifies whether the associated definition is enabled.
enable The motor is suspended (the specified Eco-mode schedule is enabled, and the
drive motor is suspended except during the specified scheduled time period).
power-enable
The drives power is cut (the specified Eco-mode schedule is enabled, and power
for the drive is cut except during the specified scheduled time period).
disable The drive always operates (the specified Eco-mode schedule is disabled, and the
drive operates continuously regardless of the specified schedule).
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
103
P2X0-1210-05ENZ0