Show Ais-Connect - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > show ais-connect

show ais-connect

This command displays the AIS Connect operation environment.
■
Syntax
show ais-connect
■ Parameter
No parameters.
■ Output
AIS Connect Function
Port
Automatic Log Transmission
Country Of Installation
Service Contract Responsibility
SSL Server Certification
Proxy Server FQDN or IP address (IPv4) of the proxy server. If it is not set, a hyphen (-) is displayed.
Proxy Port Number
Proxy Type
Proxy User Name
Remote Session
Remote Session Timeout(hour)
Issuer Name
Indicates whether the AIS Connect function is enabled.
LAN port on the ETERNUS DX that communicates with the AIS Connect server
Indicates whether logs are automatically sent.
Code and name of the country where the ETERNUS DX is shipped. If it is not set, a hyphen (-) is
displayed.
Code and name of the country in which the support office for the ETERNUS DX is located. If it is
not set, "Undefined" is displayed.
Indicates whether server certification is enabled.
Proxy server port number. If it is not set, a hyphen (-) is displayed.
Type of communication with the proxy server (HTTP / SOCKS). If it is not set, a hyphen (-) is
displayed.
User name for proxy authentication
Indicates whether a remote session from the AIS Connect server to the ETERNUS DX is allowed.
Timeout interval for remote sessions. A number between 1 to 24 or "Unlimited" is displayed.
Issuer name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
585
P2X0-1210-05ENZ0