Chapter 7 NAS Function Setting and Display
7.10 NAS Function Restoration > forced nas-fsunmount
forced nas-fsunmount
This command performs an unmount of the file system.
■
Syntax
forced nas-fsunmount -cm {0|1} {-volume-number
■
Parameter
-cm
-volume-number
or
-volume-name
■
Example(s)
This command unmounts NAS TPV#1 from CM#0.
CLI> forced nas-fsunmount -cm 0 -volume-number 1
This command unmounts NAS_TPV (NAS Backup TPV) from CM#1.
CLI> forced nas-fsunmount -cm 1 -volume-name NAS_TPV
This parameter specifies the target controller module.
0
Controller module#0
1
Controller module#1
This parameter specifies the target NAS TPV. Only a single volume can be specified.
•
Only NAS TPVs can be specified.
•
If the specified volume is unmounted, this command terminates with an error.
volume-number
Volume number
volume-name
Volume name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
volume-number
|-volume-name
813
volume-name
}
P2X0-1210-05ENZ0