Set Snmp-User - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > set snmp-user

set snmp-user

This command modifies SNMP user settings.
■
Syntax
set snmp-user {-user
[-authentication {enable | disable}] [-authentication-method {md5 | sha}]
[-encryption {enable | disable}] [-encryption-method {des | aes}]
■ Parameter
-user
or
-number
-view
-authentication
-authentication-method
-encryption Optional. This parameter specifies the encryption mode. If this parameter is set to enable, the
user_name
| -number
This parameter specifies the SNMP user name or user number.
The user number can be confirmed by using the command "show snmp-user".
user_name
SNMP user name
number
SNMP user number
Optional. This parameter specifies the name of the MIB view that will be changed. Only one
view can be specified at the same time. Up to 32 characters can be specified for a view name.
Specify a null character ("") to not specify a view name. If a null character ("") is specified, the
associated view is removed from this user setting.
mib_view_name
MIB view name
"" An MIB view name is not specified.
Optional. This parameter specifies whether to enable authentication. If it is specified, the
"-authentication-method" and "-encryption" options can be specified. In addition, the ETERNUS
DX confirms the authentication password. Between 8 and 64 characters can be used for the
password.
If omitted, the existing setting is not changed.
enable Authentication is enabled.
disable Authentication is disabled.
Optional. This parameter specifies which authentication method is used. One of the following
methods can be selected. If omitted, the existing setting is not changed.
md5 MD5 (default)
sha SHA
ETERNUS DX confirms the encryption password. Between 8 and 64 characters can be used for
the password. If omitted, the existing setting is not changed.
enable Encryption is enabled.
disable Encryption is disabled.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
number mib_view_name
} [-view {
527
|""}]
P2X0-1210-05ENZ0