Fujitsu Eternus DX100 S3 User Manual page 152

Chapter 3 Configuration Settings and Display
3.2 Volume Management > set flexible-tier-volume
-uid
-alua
■ Example(s)
The following example renames an FTV named "FTV0003" to "FTV_0003":
CLI> set flexible-tier-volume -volume-name FTV0003 -name FTV_0003
The following example changes the FTSP to which the target FTV is preferentially allocated to volume#03,
sets the Attention level threshold to 60%, and enables the copy destination volume protection function for
volume#02 (FTV):
CLI> set flexible-tier-volume -volume-number 2 -priority 3 -attention 60 -copy-protection enable
Optional. This parameter specifies the UID of the target volume. Thirty-two-digit hexadecimal
("0" to "9", "A" to "F", and "a" to "f") numbers can be specified. When "default" is specified, the
UID for the target volume does not change. The default UID is set for the target volume when
"original" is specified. If this parameter is omitted, the existing setting remains unchanged.
uid
UID of the target volume
default The UID of the target volume remains unchanged.
original The default UID is set.
Optional. This parameter specifies the ALUA setting for the target volume. If this parameter is
omitted, the existing setting remains unchanged.
follow-host-response
The ALUA setting follows the host response setting (default).
active The ACTIVE / ACTIVE setting takes priority regardless of the host response setting.
passive The ACTIVE-ACTIVE / PREFERRED_PATH setting takes priority regardless of the
host response setting.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
152
P2X0-1210-05ENZ0