Nas Function Restoration - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display

7.10 NAS Function Restoration

7.10 NAS Function Restoration
This section describes the commands that are related to the restoration of NAS.
When trouble occurs in a NAS function, the commands described in this section are used. If a suspicious failure
occurs during operation, request for your maintenance engineer to investigate the issue.
The NAS function is not supported by the ETERNUS DX200F.
• Mounting the file system
• Unmounting the file system
• Setting the file system offline
• Setting the file system online
• Displaying the check process result of the file system
• Starting the file system check
• Lock operation of the file system
• NAS engine recovery
• Bringing components (NAS engine and NAS System Volume) online
The following operations can be performed on a NAS volume.
• Deleting a NAS Volume
For details refer to
• Formatting a NAS volume
For details refer to
"delete volume" (page 127)
"format volume" (page 130)
811
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
in "3.2 Volume Management".
in "3.2 Volume Management".
P2X0-1210-05ENZ0