Test Nas-Ping6 - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.8 Network Connection Testing > test nas-ping6

test nas-ping6

This command checks the network connection between an ETERNUS DX and the remote host (IPv6).
■
Syntax
test nas-ping6 -host {
■ Parameter
-host
-nas-if-number
■ Example(s)
CLI> test nas-ping -host6 fe80::4456:d2a:53f5:fd9 -nas-if-number 0
PING fe80::4456:d2a:53f5:fd9(fe80::4456:d2a:53f5:fd9) from fe80::226:2dff:fe05:10b2 eth0: 56 data bytes
From fe80::226:2dff:fe05:10b2 icmp_seq=1 ttl=123 time=1.00 ms
From fe80::226:2dff:fe05:10b2 icmp_seq=2 ttl=123 time=1.01 ms
From fe80::226:2dff:fe05:10b2 icmp_seq=3 ttl=123 time=0.99 ms
--- fe80::4456:d2a:53f5:fd9 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 3.00ms
ip_address host_name
|
This parameter specifies the target host, in which the connection is to be checked, using the IP
address or the host name.
ip_address IP address
Example: -host fe80::4456:d2a:53f5:fd9
host_name
Host name
Example: -host www.example.com
This parameter specifies the interface from which packets are to be sent.
nas-if-number
Existing NAS interface number
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
nas-if-number
} -nas-if-number
802
P2X0-1210-05ENZ0