Chapter 7 NAS Function Setting and Display
7.5 Network Settings > set nas-route6
-nas-if-number
■
Example(s)
The following example shows settings for assigning a static route to fe80::250:56ff:feaa:2c1b:
CLI> set nas-route6 2001:db8:: -subnet-prefix-length 32 -gw fe80::250:56ff:feaa:2c1b -nas-if-number 1
This parameter specifies one NAS interface that is to be used by the route.
•
A NAS interface number that does not exist cannot be specified.
•
If the specified NAS interface number is assigned to the port that configures the multipath,
both CMs must be set with the same route.
If the route on both CMs are set differently, the route information is not set correctly when a
line failure occurs and the CM communications path is switched.
nas-if-number
NAS interface number
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
787
P2X0-1210-05ENZ0