Delete Nas-Multipath - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.4 Network Interface Multipath Configuration > delete nas-multipath

delete nas-multipath

This parameter cancels a multipath configuration for NAS ports.
■
Syntax
set nas-multipath -port
■ Parameter
-port
■
Example(s)
The following example shows the settings to cancel the pairing of CM#0 CA#0 Port#1 and CM#1 CA#0 Port#1:
CLI> set nas-multipath -port 001,101
port1 port2
,
This parameter specifies the ports for which the multipath setting is canceled. Insert a comma
(,) between each of the ports as a delimiter.
Ports without a multipath configuration cannot be specified.
port1 port2
, Ports that are to be paired
Example: -port 001,101
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
769
P2X0-1210-05ENZ0