Chapter 7 NAS Function Setting and Display
7.7 Authentication Settings > show nas-ldap
show nas-ldap
This command displays the information of the LDAP authentication settings. When the authentication is not
set, nothing is displayed.
■
Syntax
show nas-ldap
■
Output
Server 1 to Server 3
Domain
User
■
Example(s)
The following example shows the settings when LDAP authentication is set:
CLI> show nas-ldap
Server1
Server2
Server3
Domain
User
The following example shows the settings when LDAP authentication is not set. Nothing is displayed:
CLI> show nas-ldap
Server1
Server2
Server3
Domain
User
IP address or host name of the LDAP authentication server
Domain name of the LDAP authentication server
LDAP domain administrator ID
[10.21.138.254]
[example2]
[-]
[example.domain]
[example_user]
[-]
[-]
[-]
[-]
[-]
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
797
P2X0-1210-05ENZ0